Rhk New Arrival Efficient TIG Argon Arc Cold Welding Automatic Wire Feeder Motor

• Customization: Available
• Type: Argon Arc Welder
• Transport Package: Box
• Model NO.: RHK011
• Specification: 63.5*37*39cm
• Trademark: RHK
• Origin: China
• Package Size: 61.00cm * 24.00cm * 42.00cm
• Package Gross Weight: 18.000kg

Product Description

Product Description

The automatic wire feeding pipe is directly led out from the inside of the welding gun, and the narrow
working condition does not hinder the operation.

 

The wire feeding efficiency is increased by 40%, the perfect fish scale pattern can be achieved by adjusting
the welding parameters.

Technical Data
Supply Voltage	230V AC / 50/60Hz
Wire Feed Rate	0. 1m/min - 8.0m/min
Drive	4 Toothed Rolls
Wire Diameter	1.0mm~1.6mm
Protection Pating	IP21
EMC Class	A
Max Current at 100%	3A AC
TIG	Tungsten Inert Gas

Functional description

 

The TIG cold-wire feeder is single parts of the welding system. The wire required for TIG welding is delivered through the
manual welding torch (2). The wire is fed constantly to the TIG arc via a four-roll drive. The TIG arc is produced by an TIG
manual welding torch (2) and a power source (3).

The components need for welding, such as welding current, shielding gas and coolant, are connected to the power source(3).
The required welding wire depends on the material to be welded and is taken from the intergrated wire spool.

 

Putting into operation

Atmospheric charging between the welding device and cold wire feeder system can be prevented by a potential equalisation cable (8).
The corresponding connection cable is included in the scope of delivery for new devices. For devices that are already in use, this connection
cable is available as a spare part and can be retrofitted at any time.
 

The assembly of the potential equalisation cable (8) is described in the assembly instruction. The wire spool seat with a brake is used to hold standardised welding wire spools with a maximum weight of 16kg and a maximum diameter of 300mm.

Switching on the device

Switching the TIG cold wire feeder use main switch on the back.

Front panel display

Connecting the intermedia cable

(Only use the intermedia cable desgin for the TIG cold wire feeder.)

 

1. Connect the intermedia cable plug 4 to the cold wire feeder socket 5;
2. Connect the intermedia cable plug 2 to the power source switch socket.

Connecting the torch cable assembly

 

Only use intermediate cable assemblies and torch cable assemblies designed for the TIG cold wire pro. Applies to
liquid-cooled welding torches only!

 

1. Connect the torch wire connector to the wire feeder machine adaptor plug items 2; 2. Connect the torches control
wire lead connector to the wire feeder socket items 5.

Feeding in the wire

1. Open the cover on the TIG cold-wire feeder.
2. Fold both of the pressure levers (1) forwards and open the pressure rolls (2) .
3. Untie the start of the wire from the wire spool and deburr it at the front end.
4. Insert the wire through the liner (5) over the drive rolls (4) into the central socket (3) .
5. Close the pressure rolls (2) and fold the pressure levers (1) back into the vertical position.
6. Feed the wire through the cable assembly by pressing either the wire feed button on the front control panel or the torch trigger.

Replacing the drive rolls

Connecting the torch and the welding device

 

The wire feeder can be controlled using an appropriate standard torch. The welding power source can be optionally
triggered by the start welding signal from the wire feeder. The signal occurs via back side of the wire feeder socket.
4-trigger with torch for controlling the tig wire feeder function.

 

On the mode 2T, the T4 button wire feed will start feeding wire process in any time. On the mode 2T, the T2 button
will ignition the power source for arcing. Once the material was melt, pressing T4 button to contiune wire feeding.
Once release the T4 button, signal for arcing and wire feeding will stop together.

 

On the mode 4T, press the T2 to starting the arc , press T4 switch one times, wire will be automatic feeding and follow
the parameter of the pre setting. Press T4 switch again, signal for arcing and wire feeding will stop together.

 

This mode is recommended for automated welding as the wire feed and the welding process can be started via one signal.
For automatic welding, the welding process is using the separate trigger.

Overview of connections and control elements
 

Product Parameters

 

Product Name	Argon Arc Automatic Wire Feeder
Packaging	1 set/carton
Dimension	Approx 610mm*236mm*420mm
Weight	Approx 16kg
Gross Weight	20kg

Company Profile

Certifications

Exhibition & Team

FAQ

1. Product Certification & Compliance
Q: Are your torches certified for international markets (CE, ISO, AWS, etc.)?
A: Yes. Our MIG/TIG/Plasma torches comply with CE, ISO 9001:2015, and AWS standards. Plasma models
also meet RoHS directives for hazardous substance restrictions. Certificates are available upon request.

2. Quality & Durability
Q: How do you ensure consistent quality across production batches?
A: We implement a 5-stage QC process: raw material spectrometry, robotic assembly tolerance checks (±0.05mm),
24-hour thermal stress testing, arc stability validation, and final ISO-compliant packaging audits. We has professional
quality inspectors who conduct inspections during the processing and before the shipment of finished products to
ensure that the products you receive are fully customized according to your requirements.

3. Customization
Q: Can you provide OEM branding or custom packaging?
A: Yes, we support customized services. We offer: laser-engraved logos on torch handles, custom color packaging.
We can package according to your requirements, and we also have regular neutral packaging or color box packaging.
Please provide us with your design drawings, Ai or PDF files, or mail us your samples, and we will provide a quotation
based on the drawings and samples. 
 
4. Free Sample
Q: Can I have a sample for testing?
A: Yes, we can support samples.

5. MOQ
Q: What is the minimum order quantity for your welding gun products?
A: Minimum order quantity of our welding torch is 10 pieces.

6. Shipping & Logistics
Q: What's your lead time for bulk orders?
A: Standard lead time: By air, the shipping time is about 7 to 10 days by express, such as DHL, FedEx, UPS.
By Sea, it is about 25 to 30 days. By railway transportation is about 40 to 50 days. 
Please tell us your address then we will offer you the best shipping cost. 

7. Market Competitiveness
Q: What's your MOQ for distributors?
A: MOQ starts at 50 units per model,  custom quotes for 500+ units.

8. Control Quality
Q: How does your factory control quality?
A: We provide various certifications and inspection reports, support third-party inspections, and ensure that all
our products undergo strict quality checks before shipment.

9. Technical Compatibility
Q: Do you offer water-cooled torches for high-amperage applications?
A: Yes. Our TIG WP-20 Water-Cooled Torch handles up to 250A, while Plasma supports continuous cutting
with built-in thermal overload protection.

10. Warranty & After-Sales Support
Q: What's your warranty policy for defective products? How do you handle technical support or repairs in our region?
A: We provide a 12-month warranty covering manufacturing defects. Consumables (tips, nozzles) have a 3-month
warranty. Proof of purchase and defect documentation are required. We offer:  24/7 Online Troubleshooting Guides
(video tutorials, PDF manuals) .
 
11. Factory Visit
Q: Can I have a visit to your factory before the order?
A: Sure, you are very welcome to visit our factory. Our factory has 45,000 square meter area with more than 200
workers here. We are over 15 years for welding products.

12. Welding Products Catalog
Q: May I ask if you can provide a catalog of welding products?
A: Yes. We can  prov ide  MIG welding torch, TIG  welding  torch , plasma cutting torch brochures.  Please check
our catalog for details and feel free to communicate if you have any questions.

13. Contact Us
Q: How can I contact you?
 

14. Industry Trends
Q: Do you offer torches for automated welding/cutting systems?
A: Yes. We offer robotic welding torch & cnc plasma cutting torch.