Rhk Portable 5kg Welding Wire 3in1 AC220V MCU Controlled Half Bridge IGBT Mag MMA TIG MIG Welder Welding Machine

• Customization: Available
• Welding Current: MIG: 20-160A, MMA/TIG: 20-150A
• Power Supply: 220V, 50Hz
• Model NO.: MIG200-5KG
• Rated Power: MIG: 5.9kw, TIG: 4kw, MMA: 6.5kw
• Welding Voltage: 15-22V
• Duty Cycle: 35%
• Wire Supply Type: Built-in
• Wire Feed Rate: 2-15m/Min
• Wire Cylinder Diameter: 200mm
• Diameter of The Welding Wire: 0.6-1.0mm
• Electrode Diameter: 1.6-4.0mm
• MOQ: 200PCS
• Specification: 565*305*350mm
• Origin: China

Product Description

Features

Standard Parts

-3m MIG Torch

-Mask & Brush

-1.8m Electrode Holder

-1.2m Earth Clamp
 

This MIG/MAG/TIG/MMA combined welding machine, which is suitable for CO2 shielded welding, mixed gas shiedled welding, flux cored wire welding, lift TIG welding, and MMA welding.

 

This machine can use both 1KG welding wire and 5KG welding wire. It can provide precise operation with welding wire from 0.6 to 1.0mm and with electrodes from 1.6-3.2mm.

 

This machine uses micro controlled chip inside, the automatically parameter matching function can help you focus on the welding process, especially for new welders.

 

Multi-function and multi-welding mode design offers you various choices in different welding jobs. In the meantime, the compact design makes the machine portable and suitable for onsite welding activities. No matter you are using this machine for daily repair, DIY or industrial purpose, it would be a perfect choice for you.

1. Digital display(V):Voltage display, shows welding voltage.

When adjusting the Encoder-1, the digital display shows the welding voltage value intelligently matched by the system, but you can adjust the voltage by +5V and -5V manually.

When the Encoder-1 is unadjusted and wait for 3 seconds, the digital display shows the actual welding voltage value you have set.

 

2. Digital display(A):Current display, shows welding current. When adjusting Encoder-2, the digital display shows the adjusted current value.

 

3. LED-1: Power indicator light

 

4. LED-2: Fault indicator light, the light is on when the machine has a fault, and the digital display shows the fault code.

E01:Over heat protection

E02:Over current protection

 

5. Function switch:Function selecting switch

Can cycle choose through six functions.

Six LED lights correspond to six welding functions:

MMA, TIG, CO2/0.8, MAG/0.8, flux-cored wire/0.8, flux-cored wire/1.0. Adjust the welding parameters using Encoder-1 and Encoder-2.

 

6. Encoder-1:Adjust the parameters shown on the voltage digital display (V).
 

7. Encoder-2:Adjust the parameters shown on the current digital display (A).
 

8. LED-3: Function indicator light, MMA function.
 

9. LED-4: Function indicator light, lift TIG function.
 

10. LED-5: Function indicator light, CO2 gas shielded MIG function for 0.8mm wire.
 

11. LED-6: Function indicator light, mixed gas shielded MAG function for 0.8mm wire.
 

12. LED-7: Function indicator light, flux-cored FCW function for 0.8mm wire.
 

13. LED-8: Function indicator light, flux-cored FCW function for 1.0mm wire.
 

Product Parameters

Power supply	220V, 50Hz
Welding current	MIG: 20-160A
	MMA/TIG: 20-150A
Rated power	MIG: 5.9KW
	TIG: 4KW
	MMA: 6.5KW
Rated input current	26.8A
Welding voltage	15-22V
Duty cycle	35%
Power factor	0.73
Efficiency	85
Protection class	IP21S
Insulation class	F
Wire supply type	Built-in
Wire feed rate	2-15m/min
Wire cylinder diameter	200mm
Diameter of the welding wire	0.6-1.0mm
Supported wire rollers	5kg max
Electrode diameter	1.6-4.0mm
Machine weight	10kg
Carton Size	565*305*350mm
MOQ	200Pcs

Company Profile